Panasonic PT-LB30 Lcd Projector - Multi-lang - Page 47
Desk/ceiling, Fan Control, Lamp Power, Lamp Runtime, Func 1, Ceiling, Daylight, Keystone
UPC - 791871111154
View all Panasonic PT-LB30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
DESK/CEILING DESK/CEILING DESK [ CEILING This setting should be changed in accordance with the projector setting-up method. (Refer to page 18.) DESK When the projector is placed on a desk or similar. CEILING When the projector is suspended from a ceiling using the ceiling bracket (sold separately). FAN CONTROL FAN CONTROL STANDARD [ HIGH Set "FAN CONTROL" to "HIGH", when using this projector at high elevations (above 1 400 m) only. LAMP POWER LAMP POWER HIGH [ LOW This setting changes the lamp brightness. When set to "LOW", the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced. This can help to extend the lamp's operating life. If using the projector in small rooms where high luminance is not required, it is recommended that you set the "LAMP POWER" to "LOW". NOTE: B "LAMP POWER" cannot be set when no signal is being input. LAMP RUNTIME This setting displays the usage time for the lamp unit which is currently being used. When replacing the lamp unit, follow the instructions on page 56, and reset "LAMP RUNTIME" to "0". NOTE: B The lamp's operating life varies depending on the usage conditions (such as the "LAMP POWER" setting and the number of times the power is turned on and off). FUNC 1 FUNC1 DAYLIGHT [ KEYSTONE This assigns a function to the FUNC1 button of the ET-RM300 wireless remote control unit (sold separately). DAYLIGHT Functions in the same way as when "DAYLIGHTVIEW" is selected from the "PICTURE" menu. (page 39) KEYSTONE Functions in the same way as when "KEYSTONE" is selected from the "MAIN MENU". (page 36) ENGLISH-47 Adjustments and settings