Panasonic PT-LB30 Lcd Projector - Multi-lang - Page 46

RGB2 SELECT This setting is used to select the function of the RGB2 IN/1 OUT connector. RGB/YPBPR RGB/YPB PR AUTO [ RGB [ YPB PR This should normally be set to "AUTO". RGB or YPBPR is selected automatically depending on the synchronising signal status. When 480i, 576i, 480p, 576p, 1 080/60i, 1 080/50i, 720/60p and some VGA480 signals are being input, select "RGB" or "YPBPR" in accordance with the input signal. VGA60/480p VGA60/480p 480p [ VGA60 Set to "VGA60" when 59.9Hz VGA480 signals are being input (refer to page 62 for details). Set to "480p" when 480p RGB signals are being input. SXGA MODE SXGA MODE SXGA [ SXGA+ This setting is only for an SXGA signal. SXGA Select this item normally. SXGA+ When the edges of the projected image are not visible, select this item. 46-ENGLISH Noise Reduction (NR) (S-VIDEO/VIDEO only) If the signal is of such poor quality that picture interference appears, set "NR" to "ON". To turn off the "NR" feature, set to "OFF". BLACKBOARD Set to "ON" when "PICTURE MODE" is set to "BLACK-BD". (Refer to page 37.) BACK COLOR BACK COLOR BLUE [ BLACK This sets the color which is projected onto the screen when no signal is being input to the projector. FRONT/REAR FRONT/REAR FRONT [ REAR This setting should be changed in accordance with the projector setting-up method. (Refer to page 18.) FRONT When the projector is placed in front of a screen. REAR When using a translucent screen.