Panasonic PT-LB30 Lcd Projector - Multi-lang - Page 53
Care and maintenance, Remedy, Problem, Indicator, display, Possible, cause, LAMP indicator
UPC - 791871111154
View all Panasonic PT-LB30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
LAMP indicator Indicator display Illuminated (red) It is nearly time to Problem replace the lamp unit. Flashing (red) An abnormality has been detected in the lamp circuit. B Does "REPLACE Possible cause LAMP" appear on the screen after the projector is turned on? B The power may have been turned on straight away after it was turned off. B There may be an abnormality in the lamp circuit. B This occurs when B Wait for a while B Disconnect the the operation time until the lamp unit power cord by for the lamp unit is cools down before following the nearing 1 800 turning the power procedure on hours (when back on again. page 26, and then "LAMP POWER" contact an Remedy has been set to "HIGH" and when Authorized Service Center. "AI" has been set to "OFF"). Ask your dealer or an Authorized Service Center to replace the lamp unit. (page 55) NOTE: B Be sure to disconnect the power cord by following the procedure given in "Turning off the power" on page 26 before carrying out any of the procedures in the "Remedy" column. B If the TEMP indicator is illuminated and the power turns off after the procedures in the "Remedy" column have been carried out, it means an abnormality has occurred. Please contact an Authorized Service Center so that the necessary repairs can be made. Care and maintenance ENGLISH-53