Panasonic TG6500B KXTG6500B User Guide - Page 67

Initial setting, Set tel line, Set flash time, Line1, Line2, Line1:700ms

Page 67 highlights

Preparation Telephone System Answering System Useful Information Special Features FLASH Button Handset Base Unit Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. • Pressing [FLASH/CALL WAIT] cancels the mute (p. 65) or the Temporary Tone Dialing mode (p. 66). Selecting the flash time Handset The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". Each line has its own setting. The factory preset for both lines is "700 ms". • The setting should stay at 700 ms unless pressing [FLASH/CALL WAIT] fails to pick up the Call Waiting call. • If PBX functions do not work correctly, consult your PBX supplier for the correct settings. 1 Press [MENU]. Initial setting 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Set tel line 3 Scroll to "Set tel line" by pressing [d] or [B], then press the soft key ( SELECT ). Set flash time 4 Scroll to "Set flash time" by pressing [d] or [B], then press the soft key ( SELECT ). 5 Press [d] (Line1) or [B] (Line2) to select the line. Set flash time d=Line1 B=Line2 6 Select the flash time by pressing [d] or [B]. Set flash time Line1:700ms 7 Press the soft key ( SAVE ). • To select the other line, repeat from step 4. 8 Press [OFF]. For assistance, please call: 1-800-211-PANA(7262) 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

Useful Information
Answering System
Preparation
67
Special Features
Telephone System
For assistance, please call: 1-800-211-PANA(7262)
FLASH Button
Pressing
[FLASH/CALL WAIT]
allows you to use special features of your host PBX
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
Pressing
[FLASH/CALL WAIT]
cancels the mute (p. 65) or the Temporary Tone
Dialing mode (p. 66).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. Each line has its own setting. The factory preset for both lines is
“700 ms”.
The setting should stay at 700 ms unless pressing
[FLASH/CALL WAIT]
fails to
pick up the Call Waiting call.
If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1
Press
[MENU]
.
2
Scroll to “
Initial setting
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
3
Scroll to “
Set tel line
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
4
Scroll to “
Set flash time
” by pressing
[
d
]
or
[
B
]
, then press the soft key (
).
5
Press
[
d
]
(
Line1
) or
[
B
]
(
Line2
) to select
the line.
6
Select the flash time by pressing
[
d
]
or
[
B
]
.
7
Press the soft key (
).
To select the other line, repeat from step 4.
8
Press
[OFF]
.
Handset
Base Unit
Handset
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set flash time
Set flash time
d
=Line1
B
=Line2
Set flash time
Line1:700ms
SAVE