Panasonic WVCS564 WVCS564 User Guide - Page 18

q Preset Identification Setting (PRESET ID) 1. Move the cursor to PRESET ID on the preset setting menu and select ON or OFF by moving the joystick to the right or left. The factory default setting is OFF. ON: Preset ID appears on the monitor screen. OFF: Preset ID does not appear. Preset setting menu PRESET NO. 1* POSITION SET PRESET ID ALC/MANUAL DWELL TIME SCENE FILE PRESET SPEED ON ALC 10S OFF L H 2. Press the CAM (SET) key to display the preset ID setting menu. RET DEL To Enter a New Preset ID (1) Move the cursor to the desired character using the joystick, and press the CAM (SET) key. (2) The selected character appears in the editing area. (The pointer in the editing area moves to the right automatically at this moment.) To enter a blank, select SPACE. (3) Repeat the above procedure until all characters are entered. Preset ID setting menu Character Cursor PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ Character Area SPACE COPY POSI RET RESET Command DOOR............ Pointer Editing Area To Copy a Preset ID from Another Position (1) Move the cursor to COPY and press the CAM (SET) key. The preset ID in the preceding position is immediately shown. Each consecutive pressing of the CAM (SET) key displays the ID preceding the one currently displayed. (2) Display the most prospective ID. (3) Follow the step "To Change an Entered Preset ID" if necessary. PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ SPACE COPY POSI RET RESET DOOR............ To Change an Entered Preset ID (1) Move the pointer to the character to be edited in the editing area by using the joystick. (2) Select a new character by using the joystick. (3) Press the CAM (SET) key to determine the Preset ID. PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ SPACE COPY POSI RET RESET DOOR............ To Delete an Entered Preset ID Move the cursor to RESET and press the CAM (SET) key. 19 PRESET NO. 1* 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ SPACE COPY POSI RET RESET DOOR............