Panasonic WVCS564 WVCS564 User Guide - Page 27
CLEANING (CLEANING), CAMERA SETTING, To Display the Camera Setting Menu
View all Panasonic WVCS564 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
s Cleaning (CLEANING) Built-in electric mechanical contacts are refreshed at regular intervals (approx. 7 days) if CLEANING is set to ON. A dry contract affects adversely picture quality and motors operation. 1. Move the cursor to CLEANING and select ON or OFF by moving the joystick to the right or left. The factory default setting is OFF. ON: The contacts are cleaned as programmed for about 1 minute. "CLEANING" disappears when it is over. OFF: No contact cleaning. Note: Select OFF when the camera downloads or uploads the preset data. Special 1 menu ** SET UP MENU ** PRESET 1 MAP HOME POSITION OFF SELF RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN LOCAL/REMOTE LOCAL PATROL STOP CLEANING OFF CAMERA RS485 SET UP CLEANING CLEANING s Camera Setting To Display the Camera Setting Menu • Move the cursor to CAMERA , and press the CAM (SET) key. The camera setting menu appears. q Camera Identification (CAMERA ID) 1. Move the cursor to CAMERA ID, and select ON (to display the camera identification) or OFF by using the joystick. The factory default setting is OFF. 2. Follow the steps below to edit the camera ID characters: 2-1 Move the cursor to CAMERA ID and press the CAM (SET) key to display the character editing menu. 2-2 Move the cursor to the character you want to edit or change by using the joystick, and press the CAM (SET) key. The selected character appears in the editing area. 2-3 Repeat the steps above until all characters are edited. 28 Setup menu ** SET UP MENU ** PRESET 1 MAP HOME POSITION OFF SELF RETURN OFF AUTO MODE OFF AUTO PAN KEY AUTO PAN LOCAL/REMOTE LOCAL PATROL STOP CLEANING OFF CAMERA RS485 SET UP ** SET UP ** CAMERA ID OFF ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL