Panasonic WVCS564 WVCS564 User Guide - Page 36
Electronic Zoom EL-ZOOM, Image Hold IMAGE HOLD
View all Panasonic WVCS564 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
q Electronic Zoom (EL-ZOOM) The electronic zoom magnifies a scene 2-fold. With a 18-fold optical zoom lens, the camera is capable of 36-fold zoom. 1. Move the cursor to EL-ZOOM and select ON or OFF by moving the joystick to the right or left, and then press the CAM (SET) key. The factory default setting is ON. ON: Two (2) - fold electronic zoom is available with the ZOOM switch on the controller. OFF: The electronic zoom function is not used. Notes: • A scene magnified by the electronic zoom function may be inferior to a non-magnified one in picture quality. • The electronic zoom does not function in preset position setting mode. • To set preset position directly from the WV-CU360 System Controller, it is temporarily required setting the electronic zoom function to OFF. Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL q Image Hold (IMAGE HOLD) The camera picture remains as a still image on the monitor screen until the camera reaches the preset position. This function is useful for surveillance via local area network. 1. Move the cursor to IMAGE HOLD and select ON or OFF. The factory default setting is OFF. ON: The last displayed still image is shown till the camera finishes moving to a preset position. However, the still image may be distorted with the effect of panning or tilting. OFF: The current image is being displayed while the camera is moving to a preset position. Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL 37