Panasonic WVCS564 WVCS564 User Guide - Page 33
White Balance WHITE BAL, Notes, Auto-Tracing White Balance Mode ATW
![]() |
View all Panasonic WVCS564 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7. Use the joystick to match the vertical phases for both video output signals as closely as possible. (COARSE adjustment can be incremented in steps of 22.5 degrees (16 steps) with the joystick.) Note: After the 16 steps, the adjustment returns to the first step. 1 (1 - - - 16): 0 degrees 2 (1 - - - 16): 22.5 degrees 16 (1 - - - 16): 337.5 degrees 8. Move the cursor to FINE by using the joystick. 9. Use the joystick to match the vertical phase for both video output signals as closely as possible. Notes: • When the "|" cursor reaches the "+" end, it jumps back to "-". At the same time, COARSE is incremented by one step to enable a continuous adjustment. The reverse takes place when the "|" cursor reaches the "-" end. • When the joystick is kept at the right or left for one second or more, the "|" cursor moves quickly. • To reset COARSE and FINE to the preset values at the factory, press the F2 button of the WV-CU550B. (For the WVRM70, press the Right and Left switches simultaneously.) COARSE is preset at the factory to zero-crossing of the AC line phase. • If the AC line contains noise (spike noise, etc.), the stability of the vertical phase of the camera video output signal may be disturbed. q White Balance (WHITE BAL) (1) Auto-Tracing White Balance Mode (ATW) 1. Display SET UP on the monitor screen. (Refer to Setup Menu Display on page 16 for details on displaying the SET UP menu on the monitor screen.) 2. Move the cursor to WHITE BAL and select ATW by using the joystick. The factory default setting is ATW. The white balance of the camera is automatically set. 3. For fine adjustment of the ATW, press the CAM (SET) key to display the ATW fine adjustment menu on the monitor screen. 4. Move the cursor to R. Use the joystick to obtain the optimum amount of red gain. The "I" cursor moves to the right or left. 5. Move the cursor to B. Use the joystick to obtain the optimum amount of blue gain. The "I" cursor moves to the right or left. 6. Move the cursor to RET by using the joystick and press the CAM (SET) key to return to SET UP. 34 ** SYNC ** V PHASE COARSE 1(1--16) FINE - + RET ** SYNC ** V PHASE COARSE 4(1--16) FINE - + RET ** SYNC ** V PHASE COARSE 1(1--16) FINE - + RET Camera setting menu ** SET UP ** CAMERA ID ON ALC/MANUAL ALC SHUTTER OFF AGC ON(MID) SYNC INT WHITE BAL ATW AF MODE MANUAL S EL-ZOOM ON IMAGE HOLD OFF RET SPECIAL ATW fine adjustment menu ** ATW ** R - + B - + RET
![](/manual_guide/products/panasonic-wvcs564-wvcs564-user-guide-30ccdaf/33.png)