Panasonic WVCS564 WVCS564 User Guide - Page 6
Matsushita Electric Industrial Co., Ltd. here, 14˚F - 122°F [Recommended temperature
![]() |
View all Panasonic WVCS564 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. Do not use strong or abrasive detergents when cleaning the camera body. Use a dry cloth to clean the camera when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently. Care should be taken not to scratch the dome cover when wiping it. Afterwards, wipe off the remained part of the detergent in it with a dry cloth. 5. Never face the camera towards the sun. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused. 6. Never face the camera at a place exposed to light sources for a long time. If light sources such as spot light cause burn-in on the display screen, part of image may discolor due to deterioration of color filter in CCD when changing aim of the camera etc. 7. Do not install this camera upside down. This camera is designed for mounting on the ceiling or wall. Using this camera installed upside down, for example, mounted on the floor, may cause malfunction. 8. If "OVER HEAT" sign appears on the monitor screen. The temperature inside the camera exceeds the normal level because of a malfunction of the cooling fan etc. If it happens, turn the power off immediately and refer servicing to qualified service personnel. 9. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Do not use the camera in an extreme environment where high temperature or high humidity exists. Do not place the camera near heat sources such as radiators, stoves or other units that produce heat. Use the camera under conditions where temperatures are between -10°C and +50˚C (14˚F - 122°F) [Recommended temperature: +40˚C (104˚F)], and humidity is below 90%. The input power source is 24 V AC. 10. Do not install the camera near the air outlet of an air conditioner. The lens may become cloudy due to condensation if the camera is used under the following conditions. • Rapid temperature fluctuations by switching the air conditioner on and off. • Rapid temperature fluctuations due to frequent door opening and closing. • Use in an environment where eyeglasses become foggy. • Use in a room filled with cigarette smoke or dust. If the lens becomes cloudy due to condensation, remove the dome cover and wipe all moist surfaces with a soft cloth. 11. Consumables Parts having contacts such as the lens-drive motors, cooling fan motor and slip-rings inside the camera are subject to wear with time. About replacement and maintenance of such parts, please ask the nearest service center. 12. Do not aim the camera at the same object for a long time. Burn-in of an image may be caused on the fluorescent screen of CRT. • Matsushita Electric Industrial Co., Ltd. herewith declares that it will not be liable for any damage, whether direct or indirect, caused by using for business transaction or security, or malfunctioning of this product. 6
![](/manual_guide/products/panasonic-wvcs564-wvcs564-user-guide-30ccdaf/6.png)