Panasonic WVCS574 WVCS574 User Guide - Page 13
RS485 Communication Parameters (DIP Switch 1), BAUD RATE : 9 600 bit/s, DATA BIT : 8 bit
View all Panasonic WVCS574 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
DIP Switch 1 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 Unit Number 69 70 71 72 73 74 75 76 77 DIP Switch 1 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 Unit Number 78 79 80 81 82 83 84 85 86 DIP Switch 1 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 ON 12345678 Unit Number 87 88 89 90 91 92 93 94 95 * When using the Unit Number 1 to 96 setting, the unit number setting needs to be configured using the RS485 SET UP menu. For details about configuring this setting, see step 2 and page 19. * Turning on power when this setting is selected causes the RS485 SET UP menu to appear during the initialization routine. ■ RS485 Communication Parameters (DIP Switch 1) Configuring DIP Switch 1 as shown below resets communication parameters to their factory default settings. You can then change the settings as desired. DIP Switch 1 ON 12345678 ON 12345678 ON 12345678 ON 12345678 Setting Description This setting resets communication parameters to the factory default settings. BAUD RATE : 19 200 bit/s, DATA BIT : 8 bit, PARITY CHECK : NONE, STOP BIT : 1 bit BAUD RATE : 9 600 bit/s, DATA BIT : 8 bit, PARITY CHECK : NONE, STOP BIT : 1 bit BAUD RATE : 4 800 bit/s, DATA BIT : 8 bit, PARITY CHECK : NONE, STOP BIT : 1 bit Perform the following steps to use this setting. (1) Turn off the camera and use DIP Switch 1 to configure RS485 communication parameters as shown above. (2) Turn on the camera. This applies the setting you configured in step (1). (3) Turn off the camera, use DIP Switch 1 to set the unit number (pages 12 and 13), and then turn the camera back on again. -13-