Panasonic WVCS574 WVCS574 User Guide - Page 45
Gain Control [AGC ON LOW/ MID, HIGH/OFF], Electronic Sensitivity Enhancement, SENS UP
View all Panasonic WVCS574 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
• In the AUTO mode, an object is clearly imaged under highlighted conditions by using the combination technology of iris and shutter functions. Note: When the selected shutter speed caused flicker on condition that fluorescent lamps stay on, change this setting to 'OFF'. ● Gain Control [AGC ON (LOW/ MID/ HIGH)/OFF] Move the cursor to AGC and select ON (LOW), ON (MID), ON (HIGH) or (OFF) with the joystick. ** SET UP ** CAMERA ID OFF ALC/MANUAL ALC SHUTTER AUTO AGC ON(MID) SENS UP OFF SYNC INT WHITE BAL ATW1 MOTION DET OFF AF MODE AUTO L RET SPECIAL2 Notes: • Even if AGC is set to ON and if the noise reduction function is enabled, afterimages may be produced by shooting a moving object or by panning or tilting the camera. • For more information, refer to Digital Noise Reduction on page 49. ● Electronic Sensitivity Enhancement (SENS UP) Move the cursor to SENS UP and select the desired electronic sensitivity enhancement mode with the joystick. The electronic sensitivity enhancement mode changes as follows with the joystick: ** SET UP ** CAMERA ID OFF ALC/MANUAL ALC SHUTTER AUTO AGC ON(MID) SENS UP OFF SYNC INT WHITE BAL ATW1 MOTION DET OFF AF MODE AUTO L RET SPECIAL2 OFF X2 AUTO X4 AUTO X6 AUTO X16 AUTO X32 AUTO OFF X2 FIX X6 FIX X10 FIX X16 FIX X32 FIX X10 AUTO X4 FIX ● Synchronization (SYNC) Move the cursor to SYNC and select LL or INT with the joystick. ** SET UP ** CAMERA ID OFF ALC/MANUAL ALC SHUTTER AUTO AGC ON(MID) SENS UP OFF SYNC INT WHITE BAL ATW1 MOTION DET OFF AF MODE AUTO L RET SPECIAL2 Important Notices: 1. The priorities of SYNC modes are assigned as fol- lows: 1. Multiplexed vertical drive (VD2) (highest priority) 2. Line-lock (LL) 3. Internal sync (INT) (lowest priority) 2. To use internal sync, select INT. 3. Whenever the vertical drive pulse (VD2) is supplied to the camera, the camera sync mode is automatically switched to the multiplexed vertical drive pulse (VD2) regardless of the selected sync mode. Line-lock Sync Mode (LL) 1. Move the cursor to SYNC and select LL with the joy- stick. The LL sync mode is not available when the multiplexed vertical drive (VD2) pulse is supplied. 2. After selecting LL, press the CAM (SET) button. The SYNC menu appears on the monitor screen. ** SET UP ** CAMERA ID OFF ALC/MANUAL ALC SHUTTER AUTO AGC ON(MID) SENS UP OFF SYNC LL WHITE BAL ATW1 MOTION DET OFF AF MODE AUTO L RET SPECIAL2 3. Supply the video output signal of the camera to be adjusted and the reference video output signal to a dual-trace oscilloscope. 4. Set the dual-trace oscilloscope to the vertical rate and expand the vertical sync portion on the oscilloscope. Note: While the SENS UP function is selected, noise or spots may appear in the picture when the sensitivity of the camera is increased. This is a normal phenomenon. -45-