Pfaff 1245 - 1246 Owner's Manual - Page 23
Adjusting, table-top, height
View all Pfaff 1245 - 1246 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Mounting and commissioning the machine 8 Mounting and commissioning the machine A The machine must only be mounted and commissioned by qualified personnel! All relevant safety regulations are to be observed! If the machine is delivered without a table, it must be ensured that the frame and the table top which you intend to use can hold the weight of the machine and the motor, even while sewing. 8.01 Mounting The necessary electricity and compressed air supplies must be available at the machine's location (see specifications), A stable and horizontal surface as well as sufficient illumination at the machine's location. o L Due to reasons of packaging, the table top is lowered for transport. The following is a description of how to adjust the height of the table top. 8.oi.oi Adjusting the table-top height 'FAFF Fig. 8-01 • Loosen screws 1 and 2. • Set the desired table-top height and tighten screws 1 well. • Adjust the position of the right pedal so that you can operate it comfortably and tighten screw 2. • The setting of the left pedal can be adjusted with chain 3. (This adjustment is not necessary on machines with an automatic presser-foot lifter) 8-1