Pioneer AVIC N4 Owner's Manual - Page 128

126

Chapter 8

Customizing the AV Source Setting

AV

Using the high pass filter

When you do not want low sounds from the sub-

woofer output frequency range to play from the

front or rear speakers, turn the

HPF

(high pass

filter) on. Only frequencies higher than those in

the selected range are output from the front or

rear speakers.

1

Touch “HPF” in the Sound menu.

2

Touch “On” to turn high pass filter on.

To turn high pass filter off, touch “

Off

”.

3

Touch



or



to select cut-off frequency.

Each time you touch



or



selects cut-off fre-

quencies in the following order:

50

—

80

—

125

(Hz)

When

Preout

(the subwoofer controller set-

ting in

Initial

menu) is

Sub. W

, the

HPF

function is effective for front speakers only.

Adjusting source levels

SLA

(source level adjustment) lets you adjust the

volume level of each source to prevent radical

changes in volume when switching between

sources.

•

Settings are based on the FM tuner volume

level, which remains unchanged.

1

Compare the FM tuner volume level with

the level of the source you wish to adjust.

2

Touch “SLA” in the Sound menu.

3

Touch “+” or “–” to adjust the source vol-

ume.

+4

to

–4

is displayed as the source volume is

increased or decreased.

Sources are set to same source level adjust-

ment volume automatically.

•

CD, ROM, DivX, S-DVD and M-DVD

•

EXT-1

and

EXT-2

•

AV-1

and

AV-2

•

XM

and

SIRIUS

Setting Up the DVD/DivX Player

Configure the DVD/DivX player.

DVD/DivX Setup adjustments

(1) DVD/DivX Setup menu display

1

Play the disc that contains DVD-Video or

DivX.

2

Press the MENU button to change to the

AV MENU.

3

Touch “Function”.

4

Touch “DVD/DivX Setup”.

5

Touch the desired function.

Setting the language

You can set a desired subtitle, audio and menu

language. If the selected language is recorded on

the disc, subtitles, audio and menu are displayed

in that language.

1

Touch “Language” and then touch “Sub-

title Language”, “Audio Language” or

“Menu Language”.

Each language menu is displayed and the cur-

rently set language is selected.

2

Touch the desired language.

When you select “

Others

”, a language code

input display is shown. Input the four digit

code of the desired language then touch

“

Enter

”.

➲

“Language Code Chart for DVD”

➞

Page 134

❒

If the selected language is not recorded on

the disc, the default language specified on

the disc is output and displayed.

(1)

Setting Up the DVD/DivX Player

Pioneer AVIC N4 Owner's Manual - Page 128

Using the high pass filter, Adjusting source levels, Setting Up the DVD/DivX Player, DVD/DivX Setup

Page 128 highlights