Pioneer DVR-640H-S Owner's Manual - Page 112
Audio Out, Digital Out, Dolby Digital Out, Dolby Digital, DTS Out, kHz PCM Out, MPEG Out, Audio DRC
UPC - 012562810300
View all Pioneer DVR-640H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
14 The Initial Setup menu Setting Options Explanation When recording dual mono audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you want on playback. Audio Out Digital Out On • Activates the digital audio output. Off Deactivates the digital audio output. When set to Off, all the following Audio Out settings are grayed out. Dolby Digital Out Dolby Digital • Output a Dolby Digital signal when a Dolby Digital source is being played. Dolby Digital PCM Convert Dolby Digital sources to Linear PCM output. Use if your connected equipment doesn't have a Dolby Digital decoder. DTS Out On • Output a DTS signal when a DTS source is being played. Off Switch off the digital output when a DTS source is being played. Use when your connected equipment doesn't have a DTS decoder. In this case, use the ana- log audio outputs. 96 kHz PCM Out 96 kHz 48 kHz • Convert 96 kHz digital audio sources to 48 kHz output. Use if your connected equipment doesn't support 96 kHz sampling rate. 96 kHz Output 96 kHz digital audio when a 96 kHz source is being played. MPEG Out MPEG Output an MPEG audio signal when a source using MPEG audio is being played. MPEG PCM • Convert sources with MPEG audio to Linear PCM output. Use if your connected equipment doesn't have an MPEG audio decoder. Audio DRC On Switches on Audio DRC (Dynamic Range Control). Use when listening to Dolby Digital material at low volume. Off • Switches off Audio DRC. Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby Digital. 112 En