Pioneer HTD-540DV Operating Instructions - Page 14

02 Connecting up Connecting to your TV This system has three different kinds of video output that you can use to connect up your TV. Check the available inputs on your TV to see which you can use. • Do not connect a VCR between this system and your TV as DVD playback will be affected. • Use the supplied video cable to connect the VIDEO OUT jack to a video input on your TV. Connecting using the S-video output If your TV has an S-video input, you can use this instead of the standard video output for a better quality picture. • Use an S-video cable (not supplied) to connect the S-VIDEO OUT to an S-video input on your TV. Line up the small triangle below the jack with the same mark on the plug before plugging in. S-VIDEO INPUT TV VIDEO INPUT TV PR COMPONENT VIDEO OUT PB VIDEO OUT S-VIDEO Y OUT VIDEO IN CONTROL SPEAKERS FRONT RL SUB WOOFER CENTER • Placing the system unit too close to your TV may cause interference, especially if you're using an indoor antenna. If you notice interference, move the system unit away from the TV. PR COMPONENT VIDEO OUT PB VIDEO OUT S-VIDEO Y OUT VIDEO IN CONTROL SPEAKERS FRONT RL SUB WOOFER CENTER • The S-video output is switchable between S1 and S2 formats for compatibility with all TVs. See Video Output settings on page 65 for more on this. 14 En