Pioneer HTD-540DV Operating Instructions - Page 57
Using the timer
View all Pioneer HTD-540DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Using the timer 08 Chapter 8 Using the timer Setting the wake-up timer Use the wake-up timer to set the system to switch on at any time and start playing whatever source you want. • The clock must be set to the correct time for the wake-up timer to work properly (see Setting the clock on page 28). STANDBY/ON FM/AM DVD/CD TUNER TV L1/L2 LINE VOLUME ENTER TIMER ENTER SHIFT 1 Select the source you want played. For example, press TUNER (TUNER FM/AM/ ST. on the front panel) to select the radio as your source. 2 Prepare the source. For example, tune in the radio station you want to wake up to. 3 Set the volume. 4 Press TIMER (SHIFT + 6) twice to reach the timer menu. 5 Use the / (cursor left/right) buttons to select 'Wake-Up?' then press ENTER. 6 Use the / (cursor left/right) buttons to select 'Timer Edit?' then press ENTER. 7 Set the switch-on time. Use the / (cursor up/down) buttons to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you're done. 8 Set the switch-off time. Use the / (cursor up/down) buttons to set the hour, then press ENTER. Set the minute in the same way, pressing ENTER when you're done. After pressing ENTER this last time, the wakeup indicator lights, and the switch-on, switchoff times, the function (DVD/CD, etc.) and volume are confirmed in the display. 9 Switch the system into standby mode. The wake-up timer will not work if the system is left on! 57 En