Pioneer HTD-540DV Operating Instructions - Page 63

When you're done, press ENTER to exit

Get Pioneer HTD-540DV PDF manuals and user guides View all Pioneer HTD-540DV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 63 highlights

Surround sound and other settings 09 • RS - Right surround speaker • LS - Left surround speaker • SW - Subwoofer 3 Use the VOLUME +/- button to adjust the volume to an appropriate level. Turn down the volume to 40 or less to ensure you have adequate headroom. 4 Use the / (cursor up/down) buttons to adjust the speaker levels in turn. You should hear the test tone at the same volume from each speaker when seated in the main listening position. The channel level range is ± 10 dB. 5 When you're done, press ENTER to exit test tone setup. • The speaker volume can be adjusted while listening to any sound source you want by pressing CH LEVEL (SHIFT + 5) and then using the / (cursor up/down) buttons to adjust the channel levels. After you're finished with one channel, use the / (cursor left/right) buttons to move to the next. • When the AUTO listening mode is selected, using the test tone method will adjust levels for multichannel sources only. Use CH LEVEL (SHIFT + 5) and the / (cursor up/down) buttons (see tip above) to set levels for the AUTO listening mode with two channel sources. • Since the subwoofer produces ultra-low frequencies its sound may seem quieter than it actually is. 63 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Surround sound and other settings
09
63
En
•
RS
– Right surround speaker
•
LS
– Left surround speaker
•
SW
– Subwoofer
3
Use the VOLUME +/– button to adjust
the volume to an appropriate level.
Turn down the volume to
40
or less to ensure
you have adequate headroom.
4
Use the
±/²
(cursor up/down) buttons
to adjust the speaker levels in turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is ± 10 dB.
5
When you’re done, press ENTER to exit
test tone setup.
•
The speaker volume can be adjusted while
listening to any sound source you want by
pressing
CH LEVEL
(
SHIFT
+
5
) and then
using the
±/²
(cursor up/down) buttons
to adjust the channel levels. After you’re
finished with one channel, use the
³/´
(cursor left/right) buttons to move to the
next.
•
When the
AUTO
listening mode is
selected, using the test tone method will
adjust levels for multichannel sources
only. Use
CH LEVEL
(
SHIFT
+
5
) and the
±/²
(cursor up/down) buttons (see tip
above) to set levels for the
AUTO
listening
mode with two channel sources.
•
Since the subwoofer produces ultra-low
frequencies its sound may seem quieter
than it actually is.