Pioneer HTD-540DV Operating Instructions - Page 62

09 Surround sound and other settings Function setting for DVD input • DVD -> OFF/PDP1-5/PDPTV - Matches the DVD function of this unit with a numbered video input on the plasma display. For example, DVD -> PDP2 matches the DVD input with video input 2 on the plasma display. Function setting for TV input • TV -> OFF/PDP1-5/PDPTV - Matches the TV function of this unit with a numbered video input on the plasma display. For example, TV -> PDP1 matches the TV input with video input 1 on the plasma display. Setting the channel levels You can set the relative channel levels from your main listening position for all of the listening modes independently. However, the SURROUND modes are divided into two independent groups: multichannel listening modes and stereo listening modes only. If you used the Room Setup feature (page 28), the channel levels for each listening mode will already be set. However, you can still fine-tune the levels here if you need to. SURROUND ADVANCED FRONT SURROUND Function setting for L1 input • LINE1 -> OFF/PDP1-5/PDPTV - Matches VOLUME the LINE (L1) function of this unit with a numbered video input on the plasma display. For example, LINE1 -> PDP3 ENTER matches the LINE1 input with video input 3 on the plasma display. Function setting for L2 input • LINE2 -> OFF/PDP1-5/PDPTV - Matches the LINE (L2) function of this unit with a numbered video input on the plasma display. For example, LINE2 -> PDP3 matches the LINE2 input with video input 3 on the plasma display. TEST TONE CH LEVEL SHIFT 1 Select a listening mode. Press SURROUND, ADVANCED or FRONT SURROUND repeatedly to select the listening mode you want. 2 Press TEST TONE (SHIFT + 4) to hear the test tone. The test tone is output in the following order (from the speakers active in the current listening mode): • L - Front left speaker • C - Center speaker • R - Front right speaker 62 En