Pioneer HTD-540DV Operating Instructions - Page 20
Connecting up, Connecting the power
View all Pioneer HTD-540DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
02 Connecting up • It's also possible to fix the AM antenna to a wall using two screws (see illustration below). Before fixing, make sure that the reception is satisfactory. Connecting the power Before connecting the power and switching on for the first time make sure that everything is connected properly. FM wire antenna • Connect the FM wire antenna to the FM UNBAL 75Ω terminal in the same way as the AM loop antenna. For best results, extend the FM antenna fully and fix to a wall or door frame. Don't drape loosely or leave coiled up. • The signal ground ( ) is designed to reduce noise that occurs when an antenna is connected. It is not an electrical safety ground. ANTENNA AM LOOP ANTENNA FM UNBAL 75 AC IN Power outlet 1 Plug one end of the supplied power cord into the AC INLET. 2 Plug the other end into a household power outlet. • See Connecting auxiliary components on page 74 for details of other connections you can make with this system. 20 En