Pioneer HTD-540DV Operating Instructions - Page 60
Surround sound and other settings
View all Pioneer HTD-540DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
09 Surround sound and other settings Chapter 9 Surround sound and other settings Using the System Setup menu All the available settings in the setup menu are listed in Surround and sound setup options and SR+ control options for Pioneer plasma displays below. See the notes in each section for additional information about the settings. Follow the steps below to customize the settings in the System Setup menu. 5 When you're done, press ENTER to leave the System Setup menu. • The System Setup menu is exited automatically after 5 minutes of inactivity. • You can't make these settings with the Recording Mode (page 75) switched on. SYSTEM SETUP ENTER Surround and sound setup options The Room Setup feature (page 28) is designed to give you a basic surround sound setup, however you can make more detailed settings that may improve the surround sound in your listening room. Note that the first setting in each section is the default. SHIFT 1 Press SYSTEM SETUP (SHIFT + HOME MENU). 2 Use the / (cursor left/right) buttons to choose the setting you want to adjust. The current setting is shown for each option as you cycle through the display. See below for a full list and description of each. 3 Use the / (cursor up/down) buttons to adjust the setting. 4 Repeat steps 2 and 3 to make other settings. 60 En Front speakers distance setting Specifies the distance from your listening position to the front speakers: • Front 1 ft. ~ Front 30 ft. - Distance can be set in increments of 1 ft. The default is 10 ft. Center speaker distance setting Specifies the distance from your listening position to the center speaker: • Center 1 ft. ~ Center 30 ft. - Distance can be set in increments of 1 ft. The default is 10 ft. Surround speakers distance setting Specifies the distance from your listening position to the surround speakers: • Surr. 1 ft. ~ Surr. 30 ft. - Distance can be set in increments of 1 ft. The default is 10 ft.