Pioneer PRO-1010HD Owner's Manual - Page 29
CLAMP POSITION] setup, INPUT1 D-sub, 5, Setting HDMI, INPUT1 HDMI, 2
View all Pioneer PRO-1010HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
English Set [SIGNAL FORMAT] and [COLOR DECODING] as follows. Please take care when making settings. Incorrect settings can adversely affect the plasma display. Connected component SETUP SIGNAL FORMAT Component video output of a DVD player, etc. Component video output from digital tuner, etc. RGB video output of a video deck etc., with RGB output RGB video output of a PC 480p 720p 480p VGA, WVGA, 720-PC, XGA, WXGA COLOR DECODING COMPONENT COMPONENT RGB Not supported 9 Press the SET button. This completes [COLOR DECODING] setting, and returns you to the display shown in Step 7. 10 After completing settings, press the MENU button to return to the normal display. [CLAMP POSITION] setup (INPUT1 (D-sub), 5) Depending on the signal, analog RGB signals may result in the screen image appearing with a whitish or greenish cast. In such cases, set [CLAMP POSITION] to [LOCKED]. Normally, leave this setting at [AUTO]. MENU 5/∞ 2/3 SET MENU 2/3 SET 5/∞ Display operating panel Remote control unit 1 Press the MENU button to display the menu screen. S TA N D A R D PICTURE SCREEN SETUP CONTRAST BRIGHTNESS COLOR TINT SHARPNESS MPEG NR DNR CTI :0 :0 :0 :0 :0 : MID : MID : ON INPUT1 OPTION PICTURE RESET SET ENTER MENU EXIT System Settings 2 Use the 2/3 buttons to select [SETUP]. S TA N D A R D INPUT1 PICTURE SCREEN SETUP PURECINEMA CLAMP POSITION SIGNAL FORMAT COLOR DECODING HDMI INPUT BRT. ENHANCE : OFF : AUTO : 480p : RGB : ON OPTION 3 Use the 5/∞ buttons to select [CLAMP POSITION] then press the SET button. S TA N D A R D PICTURE SCREEN SETUP PURECINEMA : OFF CLAMP POSITION : AUTO SIGNAL FORMAT : 480p COLOR DECODING : RGB HDMI INPUT BRT. ENHANCE : ON INPUT1 OPTION 4 Use the 2/3 buttons to select [LOCKED]. CLAMP POSITION SET S E T : LOCKED MENU E X I T The factory default setting is [AUTO]. Each time you press the 2/3 buttons, the setting changes as follows: 3 AUTO 2 3 LOCKED 2 5 Press the SET button. This completes [CLAMP POSITION] setting, and returns you to the display shown in Step 3. 6 After completing settings, press the MENU button to return to the normal display. Notes ÷ Make this [CLAMP POSITION] setting individually for INPUT1 (D-sub) or INPUT5. ÷ When using this setup, be sure to carefully check the signal output of the component that you are using. For details, please refer to the instruction manual supplied with the component you are connecting. Setting HDMI (INPUT1 (HDMI), 2) Perform setting after completing HDMI connection to either INPUT1 or INPUT2. Follow the procedures below and make settings as they apply to the type of components connected. Notes ÷ Perform HDMI setting individually for INPUT1 or INPUT2. Remember that for INPUT1, setting is possible only when [HDMI] is selected with [INPUT1 SELECT]. ÷ Setting is not possible when INPUT1 (D-sub), or INPUT3 through INPUT5 are selected. System Settings 25 EN