Pioneer PRO-1010HD Owner's Manual - Page 37
Setting AV SELECTION
View all Pioneer PRO-1010HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3 PoutP The subscreen is displayed outside the right side of the main screen. INPUT1 INPUT2 2 Press the remote control unit's SUB INPUT button to select the subscreen input source. To exchange the main screen and subscreen inputs: Press the remote control unit's SWAP button. ¶ When 2-SCREEN mode has been selected: The right and left sides of the display will switch; what was previously the main screen will now show the subscreen, and vice versa. ¶ When PinP or PoutP has been selected: What was previously the main screen image will now appear in reduced size as the subscreen image, and vice versa. To change the position of the subscreen in PinP mode: Press the remote control unit's PIP SHIFT. Each time the button is pressed, the position of the subscreen moves in the following order: 3 Lower right 3 Upper right Lower left 2 Upper left 2 To display the currently selected input: Press the DISPLAY button. If the DISPLAY button is pressed while in multiscreen mode, the main screen and sub-screen will each be displayed with its currently selected input. Notes ¶ When using the plasma display in a profit-making activity, or when exhibiting images publicly, using the screen size function to compress or stretch the image may result in infringement of the copyrights of the image owners. ¶ If the multiscreen display is left on for an extended period of time, or if the same multiscreen display is repeatedly shown for short periods on an everyday basis, a residual image pattern may be burned onto the screen. ¶ When selecting the 2-SCREEN mode, the screen image may appear somewhat rougher, depending on the source used. ¶ The multiscreen mode will be canceled if a menu is opened. ¶ The screen size cannot be changed during multiscreen display. Operation ¶ The sound of the input selected in the main screen is output when using the multiscreen function. ¶ Since the main screen uses circuitry providing higher picture quality than the circuitry for the subscreen, main screen and subscreen picture quality differs. ¶ When performing picture quality adjustment, there are some items that do not affect subscreen picture quality. Setting AV SELECTION To let you enjoy the best picture, you can select between 5 settings during video signal input, and 2 during PC signal input. AXD1496 AV SELECTION Remote control unit 1 Press the AV SELECTION button. The current AV SELECTION mode is displayed at the top right of the screen. INPUT1 STANDARD 2 Press the AV SELECTION button again in the AV SELECTION mode indications displayed at the top right of the screen again. Each time you press the AV SELECTION button in the AV SELECTION mode indications displayed at the top right of the screen, the setting changes as follows: During video signal input 3 DYNAMIC 3 STANDARD USER 2 GAME 2 MOVIE 2 During PC signal input 3 STANDARD USER 2 The factory setting is DYNAMIC for video signal input and STANDARD for PC signal input. You are recommended to usually use STANDARD. 33 EN Operation English