Pioneer VSX-49TX Owner's Manual - Page 84
The PIONEER SR System: Operating other PIONEER, components
View all Pioneer VSX-49TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Using Other Functions memo • Remote operation may not be possible if direct light from a strong fluorescent lamp is shining on the IR receiver remote sensor window. • The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one room also changes the station in the other room. Please be careful not to change stations when recording a radio broadcast. • The volume levels of the main and sub rooms are independent. • When more than one remote control signal is transmitted at the same time, the receiver does not operate. • If you plan to leave the MULTI ROOM feature off for a lengthy period please turn off the power in both the sub and main rooms. Make sure the STANDBY indicator turns red and the MULTI ROOM indicator goes off. • If you send the SYSTEM OFF command from the sub room by remote control, the power of both rooms will go off. Please be careful when making a recording in the main room. The PIONEER SR System: Operating other PIONEER components Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the receiver's remote control at the remote sensor on the front panel of this receiver. The receiver then sends the remote control signals to the other devices via the CONTROL OUT terminal. CONTROL OUT IN Receiver CONTROL IN OUT LIGHT RECEIVER DVD/LD VCR1 /DVR VCR2 VCR3 TV REMOTE SETUP CD CD-R/ TAPE1 TUNER VIDEO SAT TV CONTROL use lock TV CONTROL FUNCTION CH + CH - VOL + VOL - FUNCTION ENTER STANDBY/ON MULTI SYSTEM OPERATION OFF MUTING MASTER VOLUME + - PIONEER component with control terminal. Remote Control To CONTROL IN terminal of another PIONEER component with control terminal. memo • You can also control PIONEER components (and those made by other manufacturers) by pointing the receiver's remote control directly at the respective component. This type of operation does not require control cords. All you have to do is recall the appropriate stored settings (see p.69 & 70). • If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able to use this unit's remote control. • If you use this feature make sure an analog (audio and/or video) connection has been made between the receiver and the component(s). 84