Pioneer VSX-816-S Operating Instructions - Page 50

11 Controlling the rest of your system 1 While pressing the RECEIVER button, press the SETUP button. The remote LCD display shows SETUP. 2 Use / to select DIRECT F then press ENTER. 3 Press the MULTI CONTROL button for the component you want to control then press ENTER. The LCD on the remote displays the component you want to control. 4 Use / to switch direct function ON or OFF then press ENTER. The LCD shows OK to confirm the setting. 5 Press and hold RECEIVER for about two seconds to exit the SETUP. Confirming preset codes Use this feature to check which preset code is assigned to a MULTI CONTROL button. 1 While pressing the RECEIVER button, press the SETUP button. The remote LCD display shows SETUP. 2 Use / to select READ ID then press ENTER. 3 Press the MULTI CONTROL button of the component for which you want to check the preset code then press ENTER. The brand name and preset code appears in the display for three seconds. Controls for TVs This remote control can control components after entering the proper codes or teaching the receiver the commands (see Operating other Pioneer components on page 48 for more on this). Use the MULTI CONTROL buttons to select the component. • The TV CONTROL buttons on the remote control are dedicated to control the TV assigned to the TV CTRL button. If you have two TVs, assign the main TV to the TV CTRL button. Button(s) Function TV Switches the DTV on or off. Components DTV Switches the TV or CATV between standby and on. Cable TV/Satellite TV/TV INPUT Switches the TV input. (Not possib TV SELECT le with all models.) TV CH +/- Selects channels. Cable TV/Satellite TV/TV/ DTV TV VOL +/- Adjust the TV volume. Cable TV/Satellite TV/TV/ DTV SOURCE Press to switch the component assigned to the TV CTRL Cable TV/Satellite TV/TV/ button on or off. DTV Switches the DTV on or off. DTV Press to get information on DTV programs. DTV Use to choose the BLUE commands on a DTV menu. DTV 50 En