Pioneer X-HM10-K Operating Instructions - Page 26

01 Speaker Setup (HTP-FS510) 6 Secure the speaker and the pole with 2 screws. • Confirm that the speaker cable does not become pinched between the pole and the speaker. • Put the speaker cable in the back of the base of the stand. Wall mounting the front speakers The front speakers have a mounting hole which can be used to mount the speaker on the wall. Before mounting • Remember that the speaker system is heavy and that its weight could cause the screws to work loose, or the wall material to fail to support it, resulting in the speaker falling. Make sure that the wall you intend to mount the speakers on is strong enough to support them. Do not mount on plywood or soft surface walls. • Mounting screws are not supplied. Use screws suitable for the wall material and support the weight of the speaker. CAUTION • If you are unsure of the qualities and strength of the wall, consult a professional for advice. • Pioneer is not responsible for any accidents or damage that result from improper installation. Mounting screw (not supplied) 5 mm to 7 mm 5 mm 10 mm 26 En