Pioneer X-HM10-K Operating Instructions - Page 75

Controlling the rest of your system 09 English Français Deutsch Italiano Español Nederlands Chapter 9 Controlling the rest of your system Setting the remote to control other components Most components can be assigned to one of the MULTI CONTROL buttons using the component's manufacturer preset code stored in the remote. However, please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the remote control will not work for the model that you are using.1 3 Use the number buttons to enter the preset code. You can find the preset codes on page 79. If the correct code has been input the power of the component being input will turn on or off. The power of the component being input will only turn on or off if that component is able to be turned on directly by remote control. 4 Repeat steps 2 through 3 to try a different code, or to enter a code for another component you want to control. 5 When you're done, press . Note • You can cancel or exit any of the steps by pressing . • After one minute of inactivity, the remote automatically exits the operation. Selecting preset codes directly Clearing all the remote control settings You can clear all presets and restore the factory default settings. • While pressing the button, press and hold the '0' button for three seconds. SYSTEM TV CONTROL INPUT CH HDD DVD VCR DISPLAY S.RETRIEVER EQ CH SELECT SLEEP CH SB CH PHASE MIDNGIHT CH SHIFT ENTER 1 While pressing the button, press and hold the '1' button for three seconds. 2 Press the MULTI CONTROL button for the component you want to control. The component can be assigned to the BD, TV, DVR or VIDEO button. Default preset codes MULTI CONTROL button Preset code BD 2126 TV 0120 DVR 2121 VIDEO 1120 Note 1 TV control codes (for example, codes for TV, CATV, Satellite TV or DTV) can only be assigned to the TV button. 75 En