Pioneer XDV-P90 Owner's Manual - Page 62

Others If You Forget Your Code Number Refer to "Changing the Level", step 3 on page 46, and press the CLEAR button 10 times. The registered code number is canceled, letting you register a new one. Error Message When problems occur with disc playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Center. Message (error number) Error-2 Error-5 Error-6 No Disc Thermal Protection DVD Player Door Open CANNOT BE PLAYED When this message is displayed Remedy The disc is dirty. Wipe the disc clean. (See page 13.) The disc is scratched. If the disc is scratched, replace it with another. (See page 13.) The disc is loaded upside down. Check that the disc is loaded correctly. (See page 14.) This type of disc (CD-ROM etc.) Replace the disc with one this cannot be played by this unit. unit can play. (See page 9.) This unit's power supply or internal mechanisms may be malfunctioning. Switch this unit OFF and then switch it back ON. (See page 17.) There are no discs loaded in the Load a disc or discs in the maga- magazine. zine. (See page 14.) The temperature of this unit is outside of the normal operating range. Wait until the unit's temperature returns to within normal operating limits. The DVD player's door is open. Close the DVD player's door. The disc does not have the same Replace the DVD with one bear- region number as this unit. ing the correct region number. This type of disc (CD-ROM etc.) Replace the disc with one this cannot be played by this unit. unit can play. (See page 9.) 59