ProForm 970 Ci English Manual - Page 11
Small, Frame, counterclockwise, outward, Insert, adjust, desired, height., Release, clockwise, until
View all ProForm 970 Ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
23. Attach the Lat Bar Holder (49) to the Frame Top (80) with the two 3/16" Screws (40). 23 40 49 80 ..•.. `,F..f,. 24. Attach the Small Seat Frame (36) to the Butterfly Upright (77) with two 3/8" x 2 3/4" Bolts (79), 3/8" Washers (2) and 3/8" Nylock Nuts (1). Note: The Butterfly Upright has two sets of holes so the Small Seat Frame can be attached at either of two different heights. Using an adjustable wrench, tighten the shaft of a Lock Knob (46) into the Small Seat Frame (36) as shown. 24 \_ _., 46 1 . . . 36 79 2 1 77 25. Press two 1" x 2" Inner Caps (5) into the 25 Small Seat Post (35). Attach the Small Seat (62) to the Small Seat Post (35) with three 3/8" x 2" Bolts (17) and 3/8" Washers (2). 62 5 2 17 26. Turn the Lock Knob (46) on the side of the Small Seat Frame (36) counterclockwise and pull it outward (see page 21). Insert the Small Seat Post (35) into the Small Seat Frame and adjust it to the desired height. Release the Lock Knob and turn it clockwise until it stops. Make sure that the pin of the Lock Knob Is In one of the holes In the Small Seat Post. 26 --'S ' . • 2 17 35 35 46 36 .