ProForm 970 Ci English Manual - Page 13
adjustable
![]() |
View all ProForm 970 Ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
31. Press two 1" x 2" Inner Caps (5) into the Large Seat Post (69). Wet the ends of the "U" Handle (68) with soapy water and slide a Small Handgrip (14) onto each end. Attach the "U" Handle (68) and the Large Seat Post (69) to the Large Seat (63) with two 3/8" x 2" Bolts (17), two 3/8" Washers (2), an 8mm x 3/4" Bolt (6) and an 8mm Washer (4). Press two Tube Caps (39) into a Pad Tube (58). Insert the Pad Tube (58) into the Large Seat Post (69) and center it. Slide a 6" Foam Pad (59) onto each end of the Pad Tube. 31 39 59 69 5 14 4 e':-•-.:)-7.2----: 2-9 i 4Q''' 6 17 14 17 63 5 58 59 68 32. Using an adjustable wrench, tighten the shaft of a Lock Knob (46) into the Leg Lever Frame (70). Turn the Lock Knob (46) counterclockwise and pull it outward (see page 21). Insert the Large Seat Post (69) into the Leg Lever Frame (70) and adjust it to the desired height. Release the Lock Knob and turn it clockwise until it stops. Make sure that the pin of the Lock Knob Is In one of the holes in the Large Seat Post. 32 46 69 70 e 33. Press two 1" x 2" Inner Caps (5) into the 33 Small Backrest Post (34). Attach the Small Backrest (33) to the Small Backrest Post (34) with two 3/8" x 2" Bolts (17) and 3/8" Washers (2). 5 2 17 33 34 2 5 13
![](/manual_guide/products/proform-970-ci-english-manual-4b56fc6/13.png)