Home » Ricoh Manuals » Multifunction Devices » Ricoh 2210L » Manual Viewer

Ricoh 2210L Operating Instructions - Page 4

Laser Safet, For North America, Power Supply, Ozone Safety, For Fax or Telephone

UPC - 026649304705

Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

CAUTION: • Protect the machine from dampness or wet weather, such as rain and snow. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). • Do not allow paper clips, staples, or other small metallic objects to fall inside the machine. • Keep toner (used or unused) and toner bottle out of the reach of children. • Be careful not to cut yourself on any sharp edges when you reach inside the product to remove misfed sheets of paper or masters. • For environmental reasons, do not dispose of the machine or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer. • The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot surface". Otherwise, an injury might occur. Power Supply The socket-outlet shall be in stalled near the product and shall be easily accessible. Ozone Safety This product generates ozone during operation. Normally, the ozone level is safe for operators. If ozone odor may appear, ventilate the room. For Fax or Telephone Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Avoid using a telephone during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use a telephone in the vicinity of a gas leak to report the leak. Laser Safety: This equipment is considered a class 1 laser device. This equipment contains a 5 milliwatt, 760-800 nanometer wavelength, AlGaAs laser diode. The following marking is attached on the back of the equipment. Caution: Use of controls or adjustment or performance of procedures other than those specified in this Operating Instructions might result in hazardous radiation exposure. For North America Laser Safety: This equipment complies with requirements of 21 CFR subchapter J for class 1 laser products. This equipment contains a 5 milliwatt, 760-800 nanometer wavelength, AlGaAs laser diode. Caution: Use of controls or adjustment or performance of procedures other than those specified in this Operating Instructions might result in hazardous radiation exposure. iii

Section	Page
Contents	10
Getting Started	16
Setting Up Your Machine	17
Unpacking	17
Selecting a Location	19
Understanding the Component Location	20
Front View	20
Rear View	20
Control Panel Functions	21
Attaching Accessories	23
Document Output Support	23
Installing the Toner Cartridge	24
Loading Paper	26
Making Connections	30
Connecting to your computer	32
Turning the Machine On	33
Installing Software	34
About Software	34
Printer Driver Features	35
Installing Software in Windows	36
System Requirements	36
Installing Software In Windows	37
Repairing Software	39
Removing Software	41
Setting Up the Machine System	42
Changing the Display Language	42
Setting the Machine ID	43
Entering Characters Using the Number Keypad	44
Setting the Date and Time	46
Changing the Clock Mode	47
Setting the Paper Type and Size	47
Setting Sounds	48
Speaker, Ringer, Key Sound and Alarm Sound	48
Speaker Volume	49
Using the Save Mode	49
Power Save Mode	49
Paper Handling	50
Selecting Print Materials	51
Type, Input Sources and Capacities	51
Guidelines for Paper and Special Materials	52
Selecting an Output Location	53
Printing to the Front Output Tray (Face down)	54
Printing to the Rear Output Slot (Face up)	54
Loading Paper in the Paper Tray	56
Using the Manual Feeder	57
Setting the Paper Type and Size for the Manual Feeder	59
Copying	60
Loading Paper for Copying	61
Preparing a Document	61
Making a Copy	62
Setting Copy Options	63
Darkness	63
Original Type	64
Number of Copies	64
Reduced/Enlarged Copying	65
Changing the Default Settings	66
Setting the Time Out Option	67
Collation Copying	67
Faxing	68
Sending a Fax	69
Changing the Fax Setup options	69
Available Fax Setup Options	70
Loading a Document	72
Adjusting the Document Resolution	73
Sending a Fax Automatically	74
Sending a Fax Manually	75
Redialing the Last Number	75
Confirming Transmission	76
Automatic Redialing	76
Receiving a Fax	77
About Receiving Modes	77
Loading Paper for Receiving Faxes	78
Receiving Automatically in Fax Mode	78
Receiving Automatically in Ans/Fax Mode	79
Receiving Manually in Tel Mode	79
Receiving Manually Using Remote Receive Start Code	80
Receiving Faxes Using the DRPD Mode	80
Receiving Faxes in the Memory	81
Automatic Dialing	82
One-touch Dialing	82
Storing a Number for One-touch Dialing	82
Sending a Fax using a One-touch Number	83
Speed Dialing	83
Storing a Number for Speed Dialing	83
Sending a Fax using a Speed Number	84
Group Dialing	85
Setting a Group Dial Number	85
Editing Group Dial Numbers	86
Sending a Fax Using Group Dialing (Multi-address Transmission)	87
Searching for a Number in the Memory	87
Searching Sequentially through the Memory	87
Searching with a Particular First Letter	88
Printing a Phone Book List	88
Advanced Fax Functions	89
Sending Broadcasting Faxes	89
Sending a Delayed Fax	90
Sending a Priority Fax	92
Polling a Remote Machine	93
Adding Documents to a Scheduled Fax	94
Canceling a Scheduled Fax	95
Additional Features	96
Using Secure Receiving Mode	96
Printing Reports	98
Using Advanced Fax Settings	100
Changing Setting Options	100
Advanced Fax Setting Options	101
Using the Remote Control Panel	103
Printing	106
Printing a Document in Windows	107
Canceling a Print Job	110
Using a Favorite Setting	111
Using Help	111
Setting Paper Properties	112
Setting Graphic Properties	114
Printing Multiple Pages on One Sheet of the Paper	116
Printing a Reduced or Enlarged Document	118
Fitting Your Document to a Selected Paper Size	119
Printing Posters	120
Using Watermarks	121
Using an Existing Watermark	121
Creating a Watermark	122
Editing a Watermark	123
Deleting a Watermark	123
Using Overlays	124
What is an Overlay?	124
Creating a New Page Overlay	124
Using a Page Overlay	126
Deleting a Page Overlay	127
Setting Up the Locally Shared Printer	128
In Windows 9x/Me	128
In Windows NT 4.0/2000/XP	130
Scanning	132
Scanning Basics	133
Scanning Process with TWAIN- enabled Software	133
Maintenance	134
Clearing the Memory	135
Adjusting Shading	136
Cleaning Your Machine	136
Cleaning the Outside	136
Cleaning the Inside	137
Cleaning the Scanning Glass	138
Maintaining the Toner Cartridge	139
Redistributing Toner	140
Replacing the Toner Cartridge	141
Setting the Notify Toner Option	142
Cleaning the Drum	142
Ignoring the Toner Empty Message	143
Troubleshooting	144
Clearing Document Jams	145
Clearing Paper Jams	146
In Tray 1	146
In Tray 2	147
In the Paper Exit Area	148
In the Fuser Area or Around the Toner Cartridge	149
In the Manual Feeder	149
Tips for Avoiding Paper Jams	150
Clearing LCD Error Messages	151
Solving Problems	154
Paper Feeding Problems	154
Printing Problems	155
Printing Quality Problems	157
Copying Problems	162
Scanning Problems	163
Faxing Problems	164
Appendix	166
Installing an Optional Tray	167
Setting Tray 2 in the Printer’s Properties	168
Setting the Paper Type and Size for Tray 2	169
Specifications	170
General Specifications	170
Scanner Specifications	171
Copier Specifications	171
Printer Specifications	172
Facsimile Specifications	173
Paper Specifications	174

Match case Limit results 1 per page

iii

CAUTION:

Power Supply

The socket-outlet shall be in stalled near the product and shall be easily accessible.

Ozone Safety

This product generates ozone during operation.

Normally, the ozone level is safe for operators. If ozone odor may appear, ventilate the room.

For Fax or Telephone

Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or

laundry tub, in a wet basement or near a swimming pool. Avoid using a telephone during an

electrical storm. There may be a remote risk of electric shock from lightning. Do not use a

telephone in the vicinity of a gas leak to report the leak.

Laser Safet

This equipment is considered a class 1 laser device. This equipment contains a 5 milliwatt, 760-800

nanometer wavelength, AlGaAs laser diode. The following marking is attached on the back of the

equipment.

Caution

Use of controls or adjustment or performance of procedures other than those specified in

this Operating Instructions might result in hazardous radiation exposure.

For North America

Laser Safet

This equipment complies with requirements of 21 CFR subchapter J for class 1 laser products.

This equipment contains a 5 milliwatt, 760–800 nanometer wavelength, AlGaAs laser diode.

Caution

Use of controls or adjustment or performance of procedures other than those specified in this

Operating Instructions might result in hazardous radiation exposure.

• Protect the machine from dampness or wet weather, such as rain and snow.

• Unplug the power cord from the wall outlet before you move the machine. While moving

the machine, you should take care that the power cord will not be damaged under the

machine.

• When you disconnect the power plug from the wall outlet, always pull the plug (not the

cable).

• Do not allow paper clips, staples, or other small metallic objects to fall inside the

machine.

• Keep toner (used or unused) and toner bottle out of the reach of children.

• Be careful not to cut yourself on any sharp edges when you reach inside the product to

remove misfed sheets of paper or masters.

• For environmental reasons, do not dispose of the machine or expended supply waste at

household waste collection points. Disposal can take place at an authorized dealer.

• The inside of the machine could be very hot. Do not touch the parts with a label

indicating the “hot surface”. Otherwise, an injury might occur.