Ricoh 2210L Operating Instructions - Page 83
Sending a Fax using a One-touch Number, Speed Dialing, Storing a Number for Speed Dialing
UPC - 026649304705
View all Ricoh 2210L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Sending a Fax using a One-touch Number 1 Load the document(s) face down into the ADF. For details about loading a document, see page 4.5. 2 Adjust the document resolution to suit your fax needs. See page 4.6. If you need to change the darkness, see page 4.3. 3 Press the one-touch button where you stored a number. The document scans into the memory. 4 The machine dials the fax number stored in the one-touch dial location and the document is sent when the remote fax machine answers. 4.16 FAXING Speed Dialing You can store up to 150 frequently-dialed numbers in one, two or three-digit speed dial locations (0-149). Storing a Number for Speed Dialing 1 Press Phone Book on the control panel. 2 Press Phone Book or the scroll button ( or ) to display "Store&Edit" on the bottom line of the display. Press Enter. 3 Press Enter when "Speed Dials" appears on the display. If you want to use one-touch dial buttons from 21 to 40, press and hold down the one-touch dial button for about 2 seconds. The display prompts you to enter a location number, showing the first available number. 4 Enter a one or two-digit speed dial number between 0 and 149, using the number keypad or scroll button ( or ) and press Enter. If a number is already stored in the location you chose, the display shows the number to allow you to change it. To start over with another speed-dial number, press Upper Level.