Ricoh Aficio SP C811DN Hardware Guide - Page 35
Test Printing, Quick Installation Guide, Adjusting Printing Position.
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Attaching the Optional Paper Feed Unit 10. Lift the front of the tray, and slide it carefully into the printer until it stops. 2 ASZ257S 11. On the rear of the unit, attach two brackets using the remaining screws. Tighten the screws firmly using a coin. ASZ258S 12. Plug in the power cable, and then turn on the printer. 13. Print the configuration page to confirm that the unit was attached correctly. • To confirm whether the optional paper feed unit was correctly attached, print the configuration page, and check "Connection Equipment" on the configuration page. If the unit was attached correctly, the following will be displayed: • 500-sheet paper feed unit: Single Tray • 1000-sheet paper feed unit: Twin Trays • 2000-sheet paper feed unit: LCT • If the tray was not installed properly, repeat the procedure from step 2. If it cannot be installed correctly even after reattempting installation, contact your sales or service representative. • If the print area is not centered correctly, see p.167 "Adjusting Printing Position". • For information about printing the configuration page, see "Test Printing", Quick Installation Guide. • "Test Printing", Quick Installation Guide 33