Ricoh Aficio SP C811DN Hardware Guide - Page 92
Letterhead, Select [Letterhead] in [Paper Type].
View all Ricoh Aficio SP C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
5. Paper and Other Media Letterhead Printer setup Printer driver setup 5 Supported paper feeding tray Duplex printing Letterhead setup Additional cautions • When printing on OHP transparencies, remove the transparencies one by one as they are output. Select [Paper Input] [Paper Type: XXX] (XXX: Tray 1 to 5, Bypass Tray) [Letterhead]. Select [Letterhead] in [Paper Type]. Any input tray can be used. • Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it. Supported Default: [Letterhead 1] If the print quality needs to be improved, select [Maintenance] [General Settings] [Letterhead Setting] [Letterhead 1] to [Letterhead 3] to change the setting value to a different number depending on the paper thickness that you are using. High numbered settings allow thicker paper to be used, but are printed more slowly. Paper tray: when loading paper vertically, make sure to set its header to the back, and when horizontally, make sure to set its header to the left. Bypass tray: when loading paper vertically, make sure to set its header to the back, and when horizontally, make sure to set its header to the right. 90