Samsung DVD-R160 Quick Guide (easy Manual) (ver.1.0) (English) - Page 16
Step 2 : Connecting HDMI/DVI to a TV, Connecting to a TV with HDMI Jack
View all Samsung DVD-R160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step 2 : Connecting HDMI/DVI to a TV If your TV has a HDMI/DVI input, connect the HDMI/DVI cable to the TV. You will enjoy the best quality image and sound. ▌Connecting to a TV with HDMI Jack Using an HDMI-HDMI cable (not included) connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of your TV. Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV screen. Connecting & Setting Up ■ To listen to sound output via HDMI, you must set the digital audio output to PCM. (See page 32) ■ Depending on the HDMI device(TV/HDMI Receiver) you use, audio may not be supported. If your TV does not support Dolby digital/DTS, Audio output is not available when you set the Digital output to Bitstream or select DTS On in the Audio setup menu. In this case, set the digital audio ouput to PCM or DTS Off. (See page 32) ■ If you use an HDMI cable to connect a Samsung TV to the DVD recorder, you can operate the recorder using the TV remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC). (See pages 30~31) ■ Please check for the logo. If your TV has an logo, then it supports the Anynet+ function. ■ The DVD-R160 supports 1080P resolution. This is only available when an HDMI cable is connected to a TV that supports 1080P resolution. ■ This player upconverts regular DVDs for playback on 1080P TVs. It does not play HD DVDs or BluRay discs. ■ To view all available resolutions when the DVD-R160 is connected to your TV via HDMI, press the P.Scan button repeatedly with the unit in Stop mode. English - 16