Samsung GX-20 User Manual (ENGLISH) - Page 82
P Program mode supports both Tv Shutter Priority and, Av Aperture Priority modes., To change
![]() |
UPC - 044701008736
View all Samsung GX-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Using the best programmed exposure, P (Program) mode P (Program) mode supports both Tv (Shutter Priority) and Av (Aperture Priority) modes. ■ To change the shutter speed You can switch to Shutter Priority automatic exposure by turning the front dial ( ) in P (Hyperprogram) mode. - You can only set the shutter speed to a value that is in relation to aperture. - If the brightness changes and the aperture value is outside the relative range, the aperture will blink in the viewfinder and on the LCD panel. ■ To change the aperture You can switch to Aperture Priority automatic exposure by turning the rear dial ( ) in P (Hyperprogram) mode. - You can only set the aperture to a value that is in relation to shutter speed. - If the brightness changes and the shutter speed is outside the relative range, the shutter speed will blink in the viewfinder and on the LCD panel. - Press the Green button ( ) to return to Hyperprogram automatic exposure. ● All the program modes have different uses of the front dial ( ) and rear dial ( ) depending on the set values. ● When using the P (Program) mode, you can change the ISO sensitivity by using the front dial ( ) while pressing and hold the OK button. 081
![](/manual_guide/products/samsung-gx20-user-manual-english-45744de/82.png)