Samsung GX-20 User Manual (ENGLISH) - Page 99
Using the Built-in Flash - test
![]() |
UPC - 044701008736
View all Samsung GX-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Using the Built-in Flash If you wish to discharge the flash in a dark or backlit location, press the flash button ( ) to pop up the flash. Select a [Flash] mode to suit your purpose from the Flash options screen in the Fn menu. You can adjust the flash output with the rear dial ( ) in any Exposure mode other than Auto mode. The built-in flash is optimum from about 0.7 m to 4 m from the subject. Exposure will not be properly controlled and vignetting may occur when used at a distance closer than 0.7 m. This distance varies slightly depending on the lens being used and set sensitivity). Compatibility of built-in flash and lens Vignetting (darkening of the corners of the image due to a lack of light) may occur depending on the lens being used and the capture conditions. We recommend taking a test shot to confirm this. ● When using the built-in flash, remove the lens hood before shooting. ● The built-in flash fully discharges for lenses without a function to set aperture lens ring to A (Auto). Auto Discharges the flash automatically in dark or backlit locations. Fill-In The built-in flash discharges manually. When the pop-up flash is closed, the flash doesn't discharge. When the flash is opened, the flash will discharge. Auto +Red-eye Lights a red-eye reduction light before automatic flash. Fill-In + Red-eye The built-in flash discharges manually. Lights a red-eye reduction light before manual flash. 1st Curtain Sync. Sets the shutter speed to capture the background clearly. 1st Curtain + Red-eye The lights a red-eye reduction light before automatic flash. 2nd Curtain Sync. Discharges flash immediately before closing the shutter curtain. Controls external flash(SEF-54PZF or SEF-36PZF) through Wireless Mode wireless connection and fires the built-in flash as master. (or the controller.) 098 Selecting Flash Mode 1. Press the Fn button. - The Fn menu appears. 2. Press the direction button (▼) on your camera. - The flash options screen appears. 3. Press the direction buttons (◄►) to select [FLASH] mode. - Pressing the green button ( ) resets the exposure value if you have made the exposure compensation to the flash. 4. Press the OK button twice. - The camera returns to a capture mode. : Move : Exit FLASH Fill-In : Set FLASH Fill-In + Red-eye : Set
![](/manual_guide/products/samsung-gx20-user-manual-english-45744de/99.png)