Samsung NE58K9560WS/AA User Manual - Page 24

Surface cooking Digital display • Power Boost : Use this setting to heat up the contents of a pot or pan faster than the maximum power level " " (Hi). • Displayed if an element knob was set to an On position after the Sabbath or Self-clean mode has ended or been cancelled, and the range was not able to detect a pot or pan on the burner within one minute. To return the display to normal and use the cooktop, set the knob to the Off position. • Error message. Displayed if the Induction cooktop has overheated because of abnormal operation. Example : Operating with empty cookware. • Error message. Displayed if the cookware on an element is unsuitable or too small or if no cookware has been placed on the cooking zone. • , Displayed when the Sabbath or Self-clean mode is operating. How to set the appliance for cooktop cooking CAUTION • The cooktop elements may be hot even when off and burns can occur. Do not touch the cooktop elements until they have cooled down sufficiently. • Never leave cooking food unattended when you set the heating element to 6 or higher. Boilovers cause smoke. Greasy spillovers may catch on fire. • Be sure you turn the control knob to OFF when you finish cooking. Induction cooktop control knob 2 1 1 1. Push the knob in. 2. Turn in either direction to the setting you want. 3. The digital displays will show " - ", " " or " ". • Move the Knob dial until the desired power level setting appears in the digital display: (Lo), (Simmer), to (Hi), (Boost). NOTE Should one or more of the cooking zones switch off before the indicated time has elapsed, see the "Troubleshooting" section. (page 53) Surface cooking 24 English