Samsung NP-NC20 User Guide - Page 145
Upgrading Memory, Replacing the Memory
UPC - 036725730489
View all Samsung NP-NC20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Upgrading Memory A memory is installed in the memory slot at the bottom of this computer. The procedures to replace the memory are described below. Replace new memory only after shutting the computer down completely. Do not replace memory when the computer is in Sleep mode. Disconnect main power plug and remove the battery before continuing. Only use the same type of memory as specified in the Product Specification. Replacing the Memory 1 Remove the 3 screws on the memory/ HDD compartment cover at the bottom of the computer using a screw driver. 2 Pull the memory module latches outward. The memory module will pop up. Remove the memory module out at an angle of 30 degrees. Fixing Screw 144
144
Upgrading Memory
A memory is installed in the memory slot at the bottom of this computer. The
procedures to replace the memory are described below.
Replace new memory only after shutting the computer down completely. Do not
replace memory when the computer is in Sleep mode.
Disconnect main power plug and remove the battery before continuing.
Only use the same type of memory as specified in the Product Specification.
Replacing the Memory
1
Remove the ² screws on the memory/
HDD compartment cover at the
bottom of the computer using a screw
driver.
Fixing Screw
2
Pull the memory module latches
outward. The memory module will pop
up.
Remove the memory module out at
an angle of ²0 degrees.