Samsung PPM50H3 User Manual - Page 11

BN68-00654A-01Eng 4/19/04 4:13 PM Page 11 Installing the Display on the Wall Attachment Panel ➢ The exterior of the PDP may be different than the picture. (Assembly and installation of the plastic hanger is the same.) ENG 1 Remove the screws from the back of the PDP. PPM42S3Q PPM50H3Q PPM63H3Q 2 Use the screws and assemble the plastic hanger. ☛ ◆ Please ask the installers to install the wall mount bracket. ◆ Please be sure to check if the plastic hanger is completely secured on both the left and right side after hanging the PDP on the wall mount bracket. ◆ Please avoid catching your fingers while installing and adjusting the angle. ◆ Please tightly secure the wall mount bracket to the wall to avoid injury from a falling PDP. 3 Tighten the screws of the plastic hanger to the back side of the PDP. PPM42S3Q PPM50H3Q PPM63H3Q 4 Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (!) to secure it to the wall mount bracket (@). Tighten the screws as shown (#) so that the PDP cannot be separated from wall mount bracket. PDP panel Wall Wall attachment panel bracket 11