Samsung SF-650 Quick Guide (easy Manual) (ver.1.0) (English) - Page 8

Installation / Moving, Maintenance / Checking, Warning, Caution - power supply

Page 8 highlights

Installation / Moving Warning Do not place the machine in an area with dust, humidity or water leaks. ► This could result in electric shock or fire. Caution When moving the machine, turn the power off and disconnect all cords; then lift the machine with at least two people. ► The machine could fall, causing human injury or machine damage. Do not place the machine on an unstable surface. ► The machine could fall, causing human injury or machine damage. The machine should be connected to the power level which is specified on the label. ► If you are unsure and want to check the power level you are using, contact the electrical utility company. Use only No.26 AWGa or larger, telephone line cord, if necessary. ► Otherwise, it can cause damage to the machine. a. AWG: American Wire Gauge Maintenance / Checking Caution Unplug this product from the wall outlet before cleaning the inside of the machine. Do not clean the machine with benzene, paint thinner or achol; do not spray water directly into the machine. ► This could result in electric shock or fire. When you are working inside the machine replacing supplies or cleaning the inside, do not operate the machine. ► You may get injured. Do not put a cover over the machine or place it in an airtight location, such as a closet. ► If the machine is not well-ventilated, this could result in fire. Make sure you plug the power cord into a grounded electrical outlet. ► Otherwise, this could result in electric shock or fire. Do not overload wall outlets and extension cords. ► This can diminish performance, and could result in electric shock or fire. Use the power cord supplied with your machine for safe operation. If you are using a cord which is longer than 2 meters (79") with a 140V machine, then the gauge should be 16 AWG or larger. ► Otherwise, it can cause damage to the machine, and could result in electric shock or fire. Keep cleaning supplies away from children. ► Children may get hurt. Do not disassemble, repair or rebuild the machine by yourself. ► It can cause damage to the machine. Call a certified technician when the machine needs repair. Safety information_ 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

Safety information
_ 7
Installation / Moving
Warning
Caution
Maintenance / Checking
Caution
Do not place the machine in an area
with dust, humidity or water leaks.
This could result in electric shock
or fire.
When moving the machine, turn the
power off and disconnect all cords;
then lift the machine with at least two
people.
The machine could fall, causing
human injury or machine damage.
Do not put a cover over the machine or place it
in an airtight location, such as a closet.
If the machine is not well-ventilated, this
could result in fire.
Do not place the machine on an unstable
surface.
The machine could fall, causing human injury
or machine damage.
Make sure you plug the power cord into a
grounded electrical outlet.
Otherwise, this could result in electric shock
or fire.
The machine should be connected to
the power level which is specified on the label.
If you are unsure and want to check the
power level you are using, contact the electrical
utility company.
Do not overload wall outlets and extension
cords.
This can diminish performance, and could
result in electric shock or fire.
Use only No.26 AWG
a
or larger, telephone line
cord, if necessary.
Otherwise, it can cause damage to the
machine.
a. AWG: American Wire Gauge
Use the power cord supplied with your machine
for safe operation. If you are using a cord which
is longer than 2 meters (79”) with a 140V
machine, then the gauge should be 16 AWG or
larger.
Otherwise, it can cause damage to the
machine, and could result in electric shock or
fire.
Unplug this product from the wall
outlet before cleaning the inside of
the machine. Do not clean the
machine with benzene, paint thinner
or achol; do not spray water directly
into the machine.
This could result in electric shock
or fire.
Keep cleaning supplies away from
children.
Children may get hurt.
When you are working inside the
machine replacing supplies or
cleaning the inside, do not operate
the machine.
You may get injured.
Do not disassemble, repair or rebuild
the machine by yourself.
It can cause damage to the
machine. Call a certified technician
when the machine needs repair.