Samsung SF531P User Manual (user Manual) (ver.1.00) (English) - Page 129
Cleaning the OPC Drum
View all Samsung SF531P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Cleaning the OPC Drum If you are getting streaks or spots on your print, you may clean the OPC drum. 1. Make sure that the paper is loaded in the automatic input tray. 2. Press Setup on the control panel. The display shows the first setup menu; FAX NUMBER/NAME. 3. Press ➛¤or ❿ until 'MAINTENANCE' appears, then press Start/Enter. 4. The display shows the first menu, 'CLEAN DRUM', then press Start/Enter. The machine automatically pulls in a sheet of paper, and prints it out. The toner particles on the OPC drum surface are fixed to the paper. 5. Press Stop to return to Standby mode. Adjusting Shading The scanning unit becomes dirty, it can alter the shading value. If your print has black lines or is blurred, adjust the shading setting. Take the following steps: 1. Load a sheet of white paper into the document feeder. 2. Press Setup on the front panel. The display shows the first setup menu; FAX NUMBER/NAME. 3. Press ➛ or ❿ until 'MAINTENANCE' appears,then press Start/Enter. The display shows the first menu; CLEAN DRUM. 4. Press ➛ or ❿ until you find 'ADJUST SHADING', then press Start/Enter. The white paper is scanned through the document feeder. 5.2 Maintenance