Samsung SF531P User Manual (user Manual) (ver.1.00) (English) - Page 33
Using Save Modes, Toner, Power, 10MIN - toner for sf
View all Samsung SF531P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Using Save Modes There is four saving mode buttons on the front panel of the SF-530 series. Using these buttons, you can save toner and power consumption, paper for printing, and toll for the fax call. SAVE Toner Power Paper Toll Toner Save Mode Toner Save mode allows the machine to use less toner on each page. Press Toner on the front panel to turn this mode on or off. • If the LED is on, Toner Save mode activates and the machine uses less toner by 50% to print a page. Using this mode will extend the life of your toner cartridge and reduce your cost per page, but will reduce print quality. • If the LED is off, Toner Save mode deactivates and the machine prints in the normal mode. Power Save Mode Power Save mode allows you to save the power consumption. Press Power on the front panel to turn this mode on or off. • If the LED is on, Power Save mode activates and the machine will go to a reduced power state. But it takes long to receive incoming faxes for warming up the machine. • If the LED is off, Power Save mode deactivates and the machine keeps ready to operate with the minimum warm-up time. This uses more energy to keep your machine warm and ready to print. To specify how long the machine waits before going to the Power Save mode, press and hold down Power, and select the desired time length among 5MIN, 10MIN and 15MIN using ➛ or ❿. Selecting OFF turns the Power Save mode off. Note: Although you turned Power Save mode off by pressing Power, it activates if you have set the time length. 1.22 Getting Started