Sanyo 24KHS72 Service Manual - Page 77
Special Remarks
![]() |
View all Sanyo 24KHS72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Special Remarks ''DRY'' ( ) Operation How it works? • Once the room temperature reaches the level that was set, the unit's operation frequency is changed automatically. • During DRY operation, the fan speed automatically runs at lower speed for providing a comfortable breeze. • ''DRY'' operation is not possible if the indoor temperature is 59 °F or less. Heating ( ) Operation Heating performance • Because this air conditioner heats a room by drawing in the heat of the outside air (heat pump system), the heating efficiency will fall off when the outdoor temperature is very low. If sufficient heat cannot be obtained with this air conditioner, use another heating appliance together with it. Defrosting • When the outdoor temperature is low, frost or ice may form on the heat exchanger coil, reducing heating performance. When this happens, a microcomputer defrosting system operates. At the same time, the fan on the indoor unit stops and the OPERATION lamp lights up red and orange alternately until defrosting is completed. Heating operation restarts after several minutes. (This interval will vary slightly depending upon the outdoor temperature and the way in which frost forms.) Cold draft prevention • For several minutes after the start of heating operation, the indoor fan runs at lower speed until the indoor heat exchanger coil has warmed up sufficiently. However, the fan may remain stopped when the room temperature is low. This is because the COLD DRAFT PREVENTION SYSTEM is operating. • Sometimes the indoor unit may not get to the set fan speed such as LOW and Cooling ( ) Operation QUIET under cool operation at very low outdoor temperatures due to the indoor unit being protected from ice or frost. • In the event of power failure, the unit will stop. When the power is resumed, Power failure during the unit will restart automatically within five minutes by the remote control unit. operation Clicking Sound Clicking sound is heard from • In heating or cooling operation, any plastic parts may expand or shrink due to the air conditioner a sudden temperature change. In this event, a clicking sound may occur. This is normal, and the sound will soon disappear. • The remote control unit sends the setting condition to the air conditioner Remote Control Unit regularly at five minute intervals. OI-801-17EG 17
![](/manual_guide/products/sanyo-24khs72-service-manual-b68abaa/77.png)