Sanyo 24KHS72 Service Manual - Page 83

Care and Cleaning (continued) Anti-Mold Filter The anti-mold filter behind the air intake grille should be checked and cleaned at least once every two weeks. How to remove the anti-mold filter 1. Grasp both ends of the air intake grille, and remove it by opening towards the front and pulling towards you. Air intake grille 2. Remove the anti-mold filter attached to the rear of the air intake grille. Anti-mold filter Cleaning Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse it in clean water, and dry it. How to replace the anti-mold filter 1. With the FRONT mark of the anti-mold filter at the front, align the two indentions near the mark with the hooks at the rear of the air intake grille, and then mount the anti-mold filter. Anti-mold filter 2. Allow the edge of the air intake grille to slide into the top of the indoor unit, and then insert it all the way inside. FRONT mark Hook Groove Pin Air intake grille OI-801-23EG 3. To attach the air intake grille to the indoor unit, press its bottom right and left corners as well as its bottom center into place. Air intake grille NOTE Attach so that the round pins at the top right and left corners of the air intake grille are inserted into the grooves at the top right and left of the indoor unit. 23