Sanyo 42LM4WPN Instruction Manual - Page 10

GB TELETEXT / OTHER FEATURES GB Direct access to page. All the numeric buttons can be used to select a page number directly. If you need page 301, then press 3 then 0 and then 1. Sub page access. Some text pages are made up of severall sub pages which rotate automatically. If you wish to view page 4 of 8 then press the sub page button. "----" will appear. Enter 0004 and the page will appear. Index page selector This selects one of the teletext index pages. Standby To switch the TV on and off. Reveal switch. This reveals hidden items on the teletext page eg:a hidden answer to a quiz question. Page up and down To select the next or previous page numbers Cursor Press the button to select the next page or the previous page number Direct Access to subjct headings. Coloured boxes are displayed at bottom of screen, the four coloured buttons give access to the corresponding subject or pages. . Size switch This will make either the top half or the bottom half of the page expand to fill the screen. Teletext / TV to access this featurepress the TXT/TV button the picture changes from TV-TXT-MIX and back to TV. JXPLA Teletext Teletext reception If your aerial signal is poor, the teletext reception operation may be erratic. Teletext brightness level You can change the teletext brightness level. Please return to TV mode.(See Picture menu -Text Brightness on page 7). Other functions ■ Switching into /from standby mode The Standby mode is used for switching the LCD monitor off for short periods of time. In standby mode the monitor is switched off but is still receiving mains power. ● To turn the monitor into standby mode, press the 4 button. The blue power indicator illuminates more brightly. ● To turn the monitor ON from standby mode, press any of the following buttons: 4, 5, 6 or 0-9 buttons. ■ Auto shut off This monitor will automatically switch into the standby mode, 10 minutes after a signal is no longer received. The time until the set will switch off is displayed on the screen. ■ Sound system selection and Programme information Press the button to display the programme information such as current programme number, station name, stereo status, sound sys- tem and remains time if set the timer, for about 5 seconds. S-1: B/G sound system S-2: D/K sound system S-3: I Sound system S-4: France SECAM L/L' system ■ Use of Audio Output Jacks The audio monitor out sockets on the rear of the set provide a fixed level audio output for reproducing sound via your audio equipment. If you find the power indicator flashing, disconnect power cord from the power outlet and contact our Service desk. This warning is a sign to let you know that the power protection function of this TV set is now operating. 10