Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 108
Putting the receiver into operation, Controlling and monitoring the receiver via the network
View all Sennheiser SL DW HEADMIC SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
SL MCR DW Putting the receiver into operation Observe the following information during startup. Connecting/disconnecting the receiver to/from the power supply system The receiver is powered using Power over Ethernet. As soon as the power supply is established, the receiver switches on automatically. There is no separate on/off switch. ▷ See „Connecting to the network (power supply and config- uration)". When the receiver starts, all four LEDs light up green for about 20 seconds. Then the LEDs change to displaying the status of the respective channel. ▷ See „Meaning of the status LEDs". Operating and configuring the receiver The receiver is operated and configured using the Sennheiser Control Cockpit control software. You cannot operate the receiver on the device itself. ▷ See „Controlling and monitoring the receiver via the net- work". Controlling and monitoring the receiver via the network To configure and use the receiver, you need the free Sennheiser Control Cockpit control software. You can download it here: www.sennheiser.com/control-cockpit-software To use the Sennheiser Control Cockpit, you must complete a one-time registration with your e-mail address to receive the software activation code. 107