Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 54

Multi-room mode te I / PoE / Ctrl RJ-45 sockets of all other SL Multi-Channel Receiver DW units (see „Connecting the receiver"). They will synchronize with the Master. When you are using multiple SL Multi-Channel Receiver DW units, it is possible to daisy-chain the network and audio signals by using the "Single-Cable Mode" (factory default setting, see „Connecting the receiver"). PoE will not be daisy-chained, so a PoE injector is required for any additional SL Multi-Channel Receiver DW. Single-room setup with both SL Rack Receiver DW and SL Multi-Channel Receiver DW ▷ Install the SL Multi-Channel Receiver DW on a wall or the ceiling with the front side of the receiver facing into the room (see „Mounting the receiver"). ▷ Install the SL Multi-Channel Receiver DW to a wall or the ceiling with the front side of the receiver facing into the room (see „Installing receivers in a rack" and „Connecting the receiver"). ▷ Mount all antennas for the rack receivers as recommended and feasible (see „Recommendations on antenna mounting"). ▷ Connect a LAN cable supplying PoE to the Dante I / PoE / Ctrl RJ-45 socket of the first SL Multi-Channel Receiver DW (see „Connecting the receiver"). This receiver will become the Master. ▷ Wait until the LEDs of the receiver light up red. ▷ Connect a LAN cable supplying PoE to the Dante I / PoE / Ctrl RJ-45 sockets of all other SL Multi-Channel Receiver DW units (see „Connecting the receiver"). They will synchronize with the Master. ▷ Switch on all rack receivers. They will synchronize with the Master. 53