Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 203
To mount the antenna wall mount to a microphone, stand, result in bad reception quality.
View all Sennheiser SL DW HEADMIC SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
The AWM 2 antenna wall mount To mount the antenna wall mount to a microphone stand ▷ Pass the antenna cable ends fitted with the R-SMA sockets through the cable notch provided at the rear bottom edge of the antenna housing. ► ▷ Do not kink the antenna cables and, when running the cables, make sure not to bend them beyond a bend radius of 43 mm. ▷ Smaller bend radiuses can cause cracks and breaks in the cable, which may not be visible from the outside. This can result in bad reception quality. ▷ Screw the sockets to the antenna holes using the supplied washers and nuts. 202
The AWM 2 antenna wall mount
202
To mount the antenna wall mount to a microphone
stand
▷
Pass the antenna cable ends fitted with the R-SMA sockets
through the cable notch provided at the rear bottom edge
of the antenna housing.
►
▷
Do not kink the antenna cables and, when running the ca
-
bles, make sure not to bend them beyond a bend radius of
43 mm.
▷
Smaller bend radiuses can cause cracks and breaks in the
cable, which may not be visible from the outside. This can
result in bad reception quality.
▷
Screw the sockets to the antenna holes using the supplied
washers and nuts.