Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 163
device, Control Cockpit, Identify, Pairing, Press pair on receiver, Paired, failed, firmware
View all Sennheiser SL DW HEADMIC SET manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Pairing SL MCR DW ▷ Press the Pair button of the desired device from the device list in the Control Cockpit. ► First, Identify appears on the display panel of the receiver. The Pairing message then appears. Any existing radio link is now disconnected. You now have 90 seconds to establish a radio link with a new transmitter. ▷ Long-press the PAIR button of the corresponding transmitter until its status LED flashes alternately green and red. The Press pair on receiver message appears on the display panel of the transmitter (SL Handheld DW and SL Bodypack DW only). Once the radio link is successfully established, Paired appears on the display panel of the transmitter (only for SL Handheld DW and SL Bodypack DW) and the status LEDs of the transmitter and the receiving channel light up green. If no radio link was successfully established, Pairing failed appears on the display panel of the transmitter (only for SL Handheld DW and SL Bodypack DW) and the status LEDs of the transmitter and the receiving channel light up red. If you try to pair devices that are running incompatible firmware versions, a message appears in the Control Cockpit prompting you to update the firmware of the transmitter. If you update the firmware now, the transmitter and the receiving channel will be paired afterwards. 162