Home » Sennheiser Manuals » Electronics Accessories » Sennheiser SL DW HEADMIC SET » Manual Viewer

Sennheiser SL DW HEADMIC SET Instruction manual SpeechLine Digital Wireless PD - Page 99

Dante I, Sennheiser Control Cockpit, Outputting digital audio signals

View all Sennheiser SL DW HEADMIC SET manuals

Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

SL MCR DW Outputting digital audio signals The Dante™ interface with two RJ-45 sockets, Dante I and Dante II, is used for outputting digital audio signals. The interface supports redundant output and daisy-chaining (see above for details). The digital audio output provides the signals from the individual channels (4 for the SL MCR 4 DW and 2 for the SL MCR 2 DW) as well as the sum signal of the channels. You can configure in the Sennheiser Control Cockpit whether the sum signal is mixed automatically or manually (see „Controlling and monitoring the receiver via the network"). ut Analog Out Reset PoE/CPtrl oPEo/EC/tCrl trl Application example: Analog Out Reset PoE/Ctrl LAN Dante™ DSP Pri Sec PoE LAN 98

Section	Page
SpeechLine Digital Wireless: System Information	2
Focus on the spoken word	4
SpeechLine Digital Wireless – the professional solution for speakers, lecturers and presenters	5
Typical applications	6
What are the features of SpeechLine Digital Wireless?	9
The Products of the SpeechLine Digital Wireless Series	13
The SL Rack Receiver DW receiver	13
SL Multi-Channel Receiver DW	15
The handheld transmitter	17
The bodypack transmitter	18
The wireless SL Tablestand 133-S DW	19
The wireless SL Tablestand 153-S DW	20
The wireless SL Boundary 114-S DW	21
The CHG 2 charger	22
The CHG 4N charger	23
The CHG 2W charging base	24
Accessories	25
The clip-on and headset microphones	25
The AWM 2 antenna wall mount	26
The AWM 4 antenna wall mount	27
The SL PASC 2 passive antenna splitter	28
The SL PASC 4 passive antenna splitter	29
Antenna cables	30
SpeechLine Digital Wireless: System planning	31
Planning	33
Country-Specific Variants	33
Number and size of the rooms	35
Shared use of the 1.9 GHZ frequency band	36
Analysis of the environmental conditions	38
Recommendations on antenna mounting	39
Antenna setup and planning for SpeechLine Digital Wireless	39
Antenna mounting options	40
Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)	41
Option 2: Combining multiple links to one AWM 2/AWM 4	44
Option 3: Rack mounting - front	48
Option 4: Rack mounting - rear	49
Further important information on antenna usage	50
Multi-room mode	52
SpeechLine Digital Wireless: Instruction manual	60
SL Rack Receiver DW	63
Product overview and operating elements – front panel	64
Product overview and connections – rear panel	67
Connecting the receiver	68
Controlling and monitoring the receiver via the network	70
Updating the firmware	74
Setting up the receiver	75
Installing receivers in a rack	78
Displays on the receiver’s display panel	83
Using the operating menu of the receiver	86
SL MCR DW	93
Product overview and operating elements	94
Directivity of the integrated antennas	95
Connecting the receiver	97
Mounting the receiver	101
Putting the receiver into operation	108
Controlling and monitoring the receiver via the network	108
Meaning of the status LEDs	110
Updating the firmware	112
The SL Handheld DW	113
Product overview	114
Displays on the display panel of the SL Handheld DW	117
Starting up and using the handheld transmitter	117
Updating the firmware	122
The SL Bodypack DW	123
Product overview	124
Displays on the display panel of the SL Bodypack DW	127
Starting up and using the bodypack transmitter	128
Updating the firmware	132
The SL Tablestand 133-S DW	133
Product overview	134
Starting up and using the table stand	135
Updating the firmware	141
The SL Tablestand 153-S DW	142
Product overview	143
Starting up and using the table stand	144
Updating the firmware	150
The SL Boundary 114-S DW	151
Product overview	152
Starting up and using the boundary microphone	153
Updating the firmware	157
Pairing	158
Identifying paired devices	159
Pairing a receiver with a transmitter	161
Performing a walk test (reception quality)	165
The SL Headmic 1 headset microphone	169
Preparing the SL Headmic 1 for use	169
Changing the microphone position (left/right)	170
Adjusting the microphone boom and the neckband	172
Using the frequency response caps	174
Using the windshield	175
Attaching the connection cable to clothing	175
Connecting the SL Headmic 1 to the SL Bodypack DW	176
The MKE 1 clip-on microphone	177
Treble boost	178
Attaching the microphone	178
Connecting the MKE 1 to the SL Bodypack DW	179
The CHG 2 charger	180
Product overview	180
Connecting the CHG 2 charger to the power supply system	181
Charging the accupack in the CHG 2 charger	182
The CHG 4N charger	183
Product overview	184
Connecting the CHG 4N charger to the power supply system	185
Charging the accupack in the CHG 4N charger	187
Meaning of the charging slot status LEDs	188
Controlling and monitoring the CHG 4N charger over the network	190
Updating the firmware	193
The CHG 2W charging base	194
Product overview	194
Connecting the CHG 2W charging base to the power supply system	195
Charging a device using the CHG 2W charging base	196
Meaning of the status LEDs on the charging surfaces	197
The AWM 2 antenna wall mount	198
Product overview	199
Connecting and mounting the AWM 2	201
The AWM 4 antenna wall mount	205
Product overview	206
Connecting and mounting the AWM 4	207
The SL PASC 2 passive antenna splitter/ combiner	210
Connectors on the rear of the device	210
The SL PASC 4 passive antenna splitter/ combiner	211
Connectors on the rear of the device	211